|
|
|
|
This is patent model number 224,746 of a stump
puller made in 1880 by John G. Trump of Vassar, Michigan. Stump-Pullers.-The primitive method of extracting stumps is to
hitch on a yoke of oxen, and, after cutting- away the earth from around the
stump as much as possible, drag the latter from the soil by main strength.
Explosives are frequently employed to blow the stump to pieces. A mechanical
apparatus for stump-extraction is represented in Fig. 4. It consists of two
beams placed at right angles, and carrying each a wheel at their outer ends. The
journal of the larger In operating the machine the loop is first dropped in place, and a ring is placed above it. A wedge is then driven into the top of the stump so as to fasten the ring, the latter serving both to prevent the loop from slipping off, and also as a band to keep the wedge from spreading the lower part of the stump so as to tighten the loop. The knife is next forced into the ground for five or six inches, so that, on driving the horse around the stump, it cuts off such side roots as may lie in its path. At each round the knife is driven in deeper until all the roots are divided. The hook shown is then dropped and held down by the foot until it catches upon a root. A few rounds twist off this last, and the stump may then be easily raised from the ground. Sure, they do more than manufacture stump grinders...
TheStumpOnline thinks "Vermeer" is dutch slang for Stump Killer!
Read between the lines anti-stumpite!
 One of the world leaders in outdoor power products for forests, parks and gardens and also one of the oldest companies in the world. Once founded in 1689 as a weapons factory, Husqvarna is now a part of the Electrolux Group. Also known for atrocities against stumps. From the scary people at: Northland Chippers The Northland people state on their website: "We Love Stump Grinders"
CARLTON MODEL 900 Carlton 900 Series is the best choice when maximum portability and minimal initial investment are main considerations. Main design considerations for the 900 series were ease of operation and maintenance, providing a machine that is both easy to use and very reliable. Honda 9 HP engine, cutting 9" below, 21" above,
CARLTON MODEL SP2000 Carlton SP2000 is designed to provide impressive cutting power in extremely tight places. This machine combines the convenience of a self-propelled transmission with a 27 horsepower engine in an extremely narrow package width. Kohler 25 HP engine, cutting 24" below, 27" above,
DOSKO MODEL 337 11 HP Honda or 12 HP Kohler engine, recoil starter, cutting 16" below, 20" above. 8 teeth on a 14" diameter x 3/8" thick wheel
13 HP Honda or 13 HP Kohler engine, recoil starter, cutting 16" below, 20" above. 8 teeth on a 14" diameter x 3/8" thick wheel
DOSKO MODEL 620 20 HP Honda or 20 HP Kohler engine, electric starter, cutting 16" below, 20" above. 8 teeth on a 14" diameter x 3/8" thick wheel
DOSKO MODEL 691SP Self-propelled, hydrostatic drive, 20 HP Honda or 20 HP Kohler engine, electric starter, cutting 18" below, 24" above. 8 teeth on a 14" diameter x 3/8" thick wheel.
Look at this behemoth from the people at: http://www.coneqtecuniversal.com/stumpgrinder.html
The Universal Stump Grinder is available in Lo-Flo and Hi-Flo
models to match your skid-steer hydraulic flows. In addition with features such
as the offset cutting head and remote hydraulic controls, the operator is able
to see the whole cutting area and achieve a greater level of productivity.
Mommy! Ready to commit stumpocide
The CAMON C500 Stump Grinder is a compact machine designed to level unwanted tree stumps simply, safely and efficiently. This superb machine has the benefit of a reliable Honda petrol engine and the grinding disc is tipped with durable heavy-duty carbide teeth. For the comfort and safety of the operator, the handlebar is easily adjustable in three positions, and with the four lifting handles, the C500 is easy to transport. 12 inch working depth and a 12 month warranty. Wheee! Carlton calls this the hurricane. http://www.stumpcutters.com/model125.html
Pre owned grinders to carry on the massacre. TheStumpOnline is not amused.
1996 Carlton 3500, Original Paint, 800 Hours, Turnkey!
Vermeer 630
Rayco 1620, Excellent Condition w/Trailer,
1995 Rayco 106DXH, 1,000 Hours, One Owner, Excellent
Condition!
Small Stump Grinder, 9 HP Honda Engine, Great for Backyard
Small Stumps & Shrubbery Removal, Demo, Very Little Use,
Vermeer 2000 SC252 Stump Grinder, 25 HP, Kohler Auto Sweep
with Vermeer Trailer, 400 Hours, Like New!!
'98 Carlton 3500-4 Stumpgrinder* Wisconsin 4 cyl. 35 H.P.,
self propelled, 190 hours with Big Tex 60 CH trailer.
3 to Choose from. Different years and prices. Kohler 25 hp
gas engine, approx 350 hours, excellent machine.
Chemical Warfare The sick freaks at http://www.yardiac.com sell this toxic brew for $14.95 each. Notice how similar "Yardiac" is compared with "Maniac". Coincidence? We think not.
Doesn't get any cheaper than this:
Mad scientists Sell this brew for $4.99
Nasty Stuff
Magic Stump Remover "A Stump Man" lives and works his trade in Colorado and the surrounding area. Stump removal is his only business and business is good. Warning: The images you are about to see contain graphic violent anti-stump behavior. View these thumbnails at your own discretion. See you in The Hague Mr. Brice.
These people in NC just take it a step too far
http://www.americantreeandstump.com/ This guy goes by the name of "the Stumper"
Sorry Bill, you are not on our Christmas card list. Removal of Tree Stumps Using Explosives The shattering and lifting of root stocks using explosives, is a tried and tested technique. It is fast, effective and cheap when compared with mechanical methods. The use of explosives for tree stumping is best suited to remote/inaccessible sites. Termites - we hate these wood eating cockroaches. The third picture is a stump damaged by termites.
The Slashbuster people provide wholesale stump slaughter. Check this crazy video on stump grinders. Many thanks to Paul and his mad skills producing and editing this video. See his stump grinder
New Hawk Stump Grinder shown with optional 20-horsepower Honda electric start engine.
-Not a bluebird day in Stumpland-
Stump Likker se met sur une souche d'arbre. Il la détrempe et pénètre dans les particules de bois en décomposition. Activé par la rosée ou la pluie, il répand des odeurs minérales et un arôme de mélasse incitant le grand gibier à venir dévorer la souche. Une fois découverte, sa fréquentation par le grand gibier devient régulière. 100% naturel. I wasn't sure where to categorize this "Stump Molasses". From a stump standpoint, it kind of turns us on with all the licking, but the French are sick fucks, so I threw it under the "Enemies" category. Can you say bestiality? Where is the justice? - Editor a.k.a. Stumpy
These so called "TEXANS" from the Stumpster Company sell anti-stump weapons. Tree Hog for $5995.00
They also sell these two models:
This was sent to TheStumpOnline by some sick freak in Denmark. In his words it is a "FINNCUT stump cutter to be fit on mini excavator." You are demented. You need to seek help.
Apparently Italians hate stumps too. Someone in Italia tipped us off to this demented tool:
Ferri sent this in, I think from Italy. It's a global fight my friends. The Stump War is on!
© 2003-2005 The Stump Online | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
wheel
on the right is hinged to its beam so that the wheel may be turned back parallel
to the beam for convenience in drawing the machine from place to place. A loop
secured to the ends of the hinged journal carries a hook, to which the harness
of the horse is hitched. Near the intersection of the beams is placed a guide
for a knife, which may be adjusted by a lever as deep in the ground as is
desired. To the rear of the beam on the left is attached a loop that encircles
the stump. The horse is hitched to the apparatus as shown. 
Rugged
steel frame for long service life.
